25 J+ Powerkit.50 V2 for Umarex HDP50 and GEN.2 (ONLY FOR 7.5J VERSIONS) | Export Valve

Powerkit.50 V2 – Ultimate Tuning for Umarex HDP50 and GEN.2 (Only for 7.5 J)

IMPORTANT: This Powerkit is intended exclusively for versions with an original power of 7.5 Joules!

The Powerkit.50 V2 represents the pinnacle of performance enhancement for the popular HDP50 series CO2 markers. This V2 version has been completely redesigned using an innovative hexagonal opening in the valve pin. This specific shape allows the CO2 gas to expand much faster and in larger volumes than standard valves, leading to a sharp increase in muzzle energy exceeding the 25 joules limit.

The valve opening itself has also been improved, enlarged, and fitted with a high-quality O-ring. This element effectively compensates for manufacturing tolerances of the pressure chambers and ensures a perfectly precise fit without unwanted gas leaks. Thanks to the use of stainless steel, not only is high corrosion resistance guaranteed, but also better mechanical sliding of the valve, which significantly reduces wear on the marker's sealing elements.

Installing the Powerkit.50 V2 set extends the valve opening time and allows maximum gas volume to pass through with each shot. The result is a reduction in the negative cooling effect (cooldown effect) and more stable performance even during rapid firing sequences. The entire tuning system is designed to be fully reversible – the marker can be returned to its original state at any time.

Technical Parameters and Enhancements:

• Power: 25 J+ (depending on temperature and type of ammunition used)
• Compatibility: Umarex T4E HDP50 and HDP50 GEN.2 (7.5 J versions only)
• Material: High-quality Stainless Steel
• Construction: Hexagonal Pin (2.5 mm) for optimal CO2 flow
• Innovation: Integrated O-ring to eliminate leaks
• Installation: Direct mounting using the included tools

Frequently Asked Questions (FAQ):

1. Is this set suitable for 11J or 13J versions of the markers?
This specific Powerkit.50 V2 set is technically fine-tuned and intended exclusively for 7.5 J versions. Installation in versions with a different base power is not recommended, as the internal valve designs differ in those versions.

2. What is the difference between version V1 and V2?
The V2 version features a completely redesigned pin design with a hexagonal opening, ensuring even more efficient gas expansion than the original version. Additionally, it includes an improved seal that better handles the manufacturing tolerances of Umarex marker bodies.

3. Does installing the set affect CO2 consumption?
Yes, the increase in power to over 25 J comes at the cost of higher gas consumption per shot. The number of effective shots per CO2 capsule will decrease, but each shot will have significantly higher impact energy.

Package Contents:

• 1x Valve (pressure chamber insert)
• 1x Mounting screw
• 1x Valve pin
• 1x 2.5 mm Allen key

Important Warnings and Legal Disclaimer:

Power Warning: This set causes an extreme increase in the marker's power. The product is not suitable for the sport of paintball; it is intended solely for training or home defense purposes.

Legal Disclaimer: The installation of an export valve may be restricted by law in some countries. Installing tuning parts voids the manufacturer's warranty. Neither the manufacturer nor the seller is responsible for damage to health or property caused by improper installation or incorrect use of the modified marker.