Powair MICROMAX 2.0 Paintball HP Regulator (300 Bar / 4500 PSI)

PowAir MICROMAX 2.0 – New Generation of Ultra-Light Regulators for Demanding Users

The PowAir MICROMAX 2.0 represents the technological peak of paintball HP regulators. With a record weight of only 110 g, it is one of the lightest models in the world, significantly improving the balance and overall handling of your gun. Version 2.0 comes with an innovated internal design and reinforced components, guaranteeing stable output pressure and high reliability even during extremely rapid fire sequences in demanding conditions.

The regulator is factory-set to a universal output pressure of 750 PSI (+/- 50 PSI), which fits the vast majority of modern markers. A practical feature is the 360° adjustable ASA thread (adjustable in 16 positions), allowing you to set the position of the fill nipple and gauge exactly where they won't interfere with your gun grip or when aiming through optics. This system eliminates uncomfortable nipple pressure on the wrist.

Maximum safety is ensured by double O-rings on the regulator neck and an integrated micro-filter in the intake fill valve, which protects the internal mechanism from compressor impurities or field dust. The entire regulator is finished in an elegant All-Black design, including black burst disks and a special black 20 mm pressure gauge with the PowAir logo. The innovated version 2.0 also significantly improves air utilization efficiency and noticeably reduces consumption per shot from your gun.

However, some markers require higher operating pressure. E.g. in cold temperatures, or due to the way they function. This applies among others to some blowback models such as the Maxtact TGR or First Strike T15. There is a solution for these models as well. By installing two additional Regulator Shims from https://www.rprshop.cz/powair-micromax-parts-kit---nahradni-dily-pro-300bar-regulator/ you can increase the output pressure to 850-900 PSI.

Technical Parameters:

• Construction: Ultra-compact, total weight only 110 g.
• Working Pressure: 300 Bar / 4500 PSI.
• Output Pressure: Approx. 750 PSI (+/- 50 PSI) – ideal for most HP and LP systems.
• Thread: 360° ASA, adjustable in 16 positions for perfect ergonomics.
• Materials: High-quality aluminum and magnesium alloys for extreme durability while maintaining low weight.
• Safety: Double O-rings, color coding (orange = 300 Bar, green = 200 Bar).
• Filtration: Micro-particle filter in the fill nipple against impurities.
• Design: All-Black finish, black burst disks, black 20mm gauge with logo.

Frequently Asked Questions (FAQ):

Is this regulator suitable for my gun?
Yes, the 750 PSI output pressure is standard for most guns like Planet Eclipse EMF100, Tippmann TMC, Milsig M17, and other mechanical or electronic models.

How do I adjust the fill nipple position?
The MICROMAX 2.0 regulator has a 360° adjustable head. Just loosen the locking screws, set the head to the desired position relative to the gun body, and secure it again.

Can I use the regulator on a 200 Bar (3000 PSI) tank?
This model is primarily intended for 300 Bar systems (orange O-ring), but mechanically it is compatible with 200 Bar tanks as long as safety checks are maintained.

Package Content:

PowAir MICROMAX 2.0 regulator, fill nipple protection cap, thread protection cap, packed in a sturdy printed cardboard box.